Use a coarse sandpaper, a sanding block or a power sander to strip the finish off the surface. Sand until the surface is smooth and most of the shiny surface is gone. Once the majority of the old finish is off, switch to a medium grit sandpaper and continue to remove any patches of finish still sticking to the wood.
How do you sand and refinish an old chair?
Prime the Chair Inspect the first coat and sand off high sports, runs, or rough areas with 220-grit sandpaper, as needed. Remove all sanding dust. Repeat the same process to apply a second thin coat of primer, sand, and clean the piece.
How do you refinish a chair without stripping it?
You can use a gel stain to restore the colour. Gel stains are great for antique furniture restoration. The best part is that you don’t need to strip off the original old colour of your furniture. Gel stains can easily restore the faded and worn colour of wood furniture.
Do you have to strip wood before sanding?
It’s almost always better to strip than to sand. To begin with, except in cases where the old finish is flaking off, it’s a lot more work to sand than to strip using a paint-and-varnish remover. Stripping is messy, which is probably the reason many people chose to sand instead.
How do you refinish wood furniture without stripping?
Now that you have everything you need, it’s time to start restoring our piece of wooden furniture without stripping and sanding.
- Remove any hardware.
- Wipe on mineral spirits.
- Clean the surface.
- Fix the white rings.
- Fill small cracks and imperfections.
- Try to fix the dents.
- Restore the colour with gel stain.
What is the fastest way to sand a chair?
Sand the entire chair with a palm sander to even out the surface. First, sand the entire chair with 80- to 100-grit sandpaper. Then switch to finer sandpaper, between 150- to 200-grit, to get a smooth surface (sandpapers with higher numbers have finer grit).
Can I stain over stain without sanding?
You do not need to sand off the previous stain and finish. The purpose of the light sanding is to give a little tooth to the surface to help your new stain colour stick.
How do you sand and refinish wood?
Use a coarse sandpaper, a sanding block or a power sander to strip the finish off until the surface is smooth. Once most of the finish is off, switch to medium grit sandpaper to further remove any shine. Finally, finish off with a fine grit sandpaper to smooth out the wood until all finish is completely removed.
Do you have to remove old stain before restaining furniture?
You don’t need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.
Can I reupholster a chair myself?
If you have worn-out chair seats, you can easily re-cover them. Reupholstering is a great way to bring tired-looking chairs-even tired-looking rooms-back to life. The materials are relatively inexpensive, the tools are simple and it’s a project almost anyone can tackle with success.