Question: What Is A Retaining Ring Used For?

Retaining rings are used to hold components onto a shaft or into a bore. The smooth, round finish of most shafts or bores makes them difficult to attach to with alternative methods, whereas retaining rings clamp around them and create a shoulder that keeps parts in place.

In what situation and application would you use a retaining ring?

Retaining rings are also used in several other applications, such as fitness equipment, wind turbines, bearing retention, bicycles, doorknobs, gas pumps, office equipment, and many others.

What is the difference between a snap ring and a retaining ring?

There really isn’t a difference. Snap-ring and retaining ring such as # 410-21 are two names for the same thing. If your tail light looks like # ST40RB then use # A40SRB.

What are the two types of retaining rings?

There are four main types of retaining rings available, each of which may then be broken down into sub-types depending on unique application needs:

  • Tapered section. Axially assembled. Inverted. Beveled. Bowed. Radially assembled. Self-locking.
  • Constant section.
  • Spiral.
  • Circular push-on.

How do you use circlips?

How to use external circlip pliers to install circlips

  1. Step 1 – Insert tips. Fit the tips of the pliers into the grip holes on the ends of the circlip you want to install.
  2. Step 2 – Squeeze handles. Close the handles of the circlip pliers – this will open the tips and expand the circlip.
  3. Step 3 – Install circlip.

How do I remove a retaining ring?

Here are the steps:

  1. Take a pair of punches and make sure that they fit in the holes of your bike’s snap ring.
  2. Put the punches into the snap ring’s holes.
  3. Slide a dowel rod between the punches.
  4. Push the top parts of the punches together as you would when you use chopsticks.
  5. Open the snap ring up.
You might be interested:  FAQ: What Vegetables Can You Plant In Summer?

Why is it called a Jesus clip?

The term “Jesus clip” comes from the propensity of the clip’s spring action to launch the clip at a high velocity when removing or installing, leading to remarks such as, “Oh Jesus, where did it go?”

What is an external retaining ring?

External retaining rings (also known as “external snap rings”) sit in the grooves on the exterior of shafts of any size. The areas of the ring that protrude out from the shaft hold it in place. If you do not see a ring that meets your specs, you can custom-design your own external snap ring right on our site!

Can snap rings be reused?

Retaining rings are circular fasteners that, when installed in a groove, hold components on a shaft or inside a bore. Also known as snap rings, these fasteners are removable and reusable.

What do snap rings hold?

A snap ring is a strong, thin, C-shaped metallic ring that works as a retaining fastener on shafts and inside circular bores to retain assembly parts. However, unlike a nut or bolt that threads onto a piece, a snap ring or C-clip snaps into a circular groove inside a bore housing or on the shaft.

What are circlip pliers for?

Circlip pliers (also known as snap ring pliers) are used to remove and insert internal or external circlips.

What is a retaining washer?

Retaining washers, also known as retention washers or retaining rings, are fasteners that hold assemblies in place. New Process Fibre offers a wide range of washers, including retaining washers, suitable for many different uses.