FAQ: What Does Rc And Rh Mean On A Thermostat?

RC: The RC terminal is the 24-volt cooling power supply. RH: The RH terminal is the 24-volt heating power supply. (Note: The RC and RH terminals are jumpered together in a four-wire heat/cool system and a single-stage heat pump system, but not in a five-wire heating/cooling system.)

Do I use RH or RC on thermostat?

There is no standard for the colour of the RH wire, but most units use a red one. The RC wire, on the other hand, refers to “red cooling”. It’s the same with the RH wire in that it powers the thermostat. For the RC, it powers the cooling system.

Does R wire go to RC or RH?

Here are some general guidelines: An R wire can go into a Nest Learning Thermostat’s Rc or Rh connector. The Nest Thermostat E only has an R connector, which is typically where an R wire would go. These are not jumper wires, and you can insert the Rc wire into the Rc connector and the Rh wire into the Rh connector.

Do I need a jumper between RC and RH?

Effectively there isn’t a second RH wire, although there is an RH terminal. However, the heating still needs to be controlled, so a wire known as a jumper is connected between the RC and the RH terminals so that power gets to the heating control part of the thermostat.

What does the RC wire do on a thermostat?

The Rc Wire Rc wires are for air conditioning systems or dual transformer systems. Dual transformer systems refer to a setup with a cooling and heating transformer. Rc wires connect to the RC terminals on your thermostat.

You might be interested:  Who Created The 1995 Tv Show Get Smart 95?

What is RH in a thermostat?

RH: The RH terminal is the 24-volt heating power supply. Y/O: The Y/O terminal is used to control the cooling condenser. When the thermostat calls for cooling, signals are sent to power up the condenser and the blower fan, cooling your home. W/B: The W/B terminal controls the heat relay or valve.

What is the Rh wire on the Nest thermostat?

What is the Rh wire on the Nest thermostat? The Rh wire is the power input to the heating system of your air conditioning. If the connection is not established, your air conditioning will stop working.

What happens if you wire thermostat wrong?

Potential consequences of improper installation could include: Electric shock. Blowing a circuit breaker. Damaging the thermostat unit, the electrical system or even the AC/furnace unit itself.

What is the R wire on a Honeywell thermostat?

The R wire is the power wire for your heating and cooling system. If you only have one R wire (no Rh or Rc), you can connect your R wire to either Rc or Rh on the Nest thermostat.

Should RC and RH be connected?

If you have both an Rh (Red-heat for powering the heating) and an Rc (Red-cool for powering the cooling), then the R wire can be connected to either Rh or Rc. If you only have a single R wire, then it will only have an R connector, which is the connection you’ll use.

Is RC the same as C wire?

Typically, the wires that give the power supply (usually termed as the ‘hot’ wires) are marked Rc (for cooling) and Rh (for heating). They give a 24-volt power supply from the HVAC system’s control panel. ‘ If your system has a common wire, it will be marked ‘C’ at most times.

You might be interested:  Readers ask: What Is The Economy Of Easter Island?

What color wire goes where on a thermostat?

This is the most typical thermostat wiring style, and it applies to systems that regulate both heat and air conditioning. The wires are typically arranged as follows: red for 24-volt hot, white for heat, yellow for cooling, green for the fan, and blue for common (although the common wire may be a different color).

What is the yellow wire on a thermostat?

Blue or Yellow Thermostat Wires The first yellow wire is responsible for controlling the first cooling stage. The Y2 wire connects to its own Y2 terminal and controls the second cooling stage. Blue “C” wires are most common in thermostats that connect to your heat pump.