Readers ask: What Are Standard Blind Widths?

If you’ve ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches. However, window sizes and shapes can vary greatly, especially in older homes or homes with custom windows.

What is common blind width?

Blind Slat Sizes Common slat widths are 1/2 inch, 1 inch, or 2 inches, which is the most popular width. Smaller slats look proportionate on smaller windows, and they offer a more subtle look that blends in with the surroundings.

What are standard blind sizes?

The standard sizes of window blinds ought to match these and can be found in most stores:

  • Picture windows: 1–8 feet high, 2–8 feet wide.
  • Double-hung windows: 36–72 inches high, 24–48 inches wide.
  • Sliders: 24–60 inches high, 36–84 inches wide.

What is the most common blind size?

The most common slat size (slat = the individual blind piece) is 2 inches – which fits the majority of windows.

How is blind width measured?

Use a metal tape measure for accuracy. Measure the width at 3 different points as it may not be consistent along the entire recess. Measure at either end and in the middle, and use the smallest measurement as your width guide. For venetian, roman and roller blinds reduce the width by 1cm to allow for smooth extension.

How much smaller should blinds be than the window?

Record the height of the window accurately, including any brackets or moldings you may have. Add three inches to the measurement to ensure sufficient mounting space. Deduct half an inch from the blind’s height when it extends beyond the frame. Need Mini Blinds?

You might be interested:  What Does An English Basement Look Like?

How wide can horizontal blinds be?

The width of these blinds can be anywhere between 70” and 96”. It is sufficient for most windows. however, if you have windows that are larger then it is recommended to install a set of 2 or 3 blinds per headrail for better coverage and fit.

How do I know what size blinds to buy?

Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.

What size blinds do I need for a 35 inch window?

The actual width of the 35″ blinds are 34.5″ (half inch narrower) to comfortably fit inside a 35″ opening. So if your frame is exactly 34.5 inches, I would go with the 35″ blinds.

What is the width of a standard window?

Standard width is between 1 foot, 2 inches and 2 feet, 11.5 inches. Standard height is between 2 feet, 5.5 inches, and 6 feet, 5.5 inches.

What are standard mini blind sizes?

Standard sized blinds are anywhere from 24 x 72 – 72 x 72 off the shelf at your local hardware stores.

Are blinds measured width by height?

One of the most important steps is to measure both the height and width in 3 places – top, middle, and bottom. For Roller Shades, Solar Shades, Sheer Shades, or Vertical Blinds use the measurement from the top of the window. For all other styles, use the narrowest width measurement of the top, middle and bottom.

You might be interested:  Codigo para llamar a cuba

Does blind width include brackets?

For roller blinds, you only need to measure the width at the top of the recess. This is because the fabric is narrower than overall width of the blind which includes the controls and brackets.

How much space do you need on side of blinds?

Blinds.com recommends at least 1.5″ of overlap on each side of the window for blinds and shades, and 2″ of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

What size is a 4ft blind in CM?

Tea Time Red Daylight Roller Blind FREE CUT TO SIZE SERVICE (4ft ( 122cm ))