Fascia boards overhang the walls of the building and close the gap between the walls and the roof. The Fascia helps to prevent water and animal ingress into the roof and loft space, as well as creating a more aesthetically pleasing appearance, compared to open or rough ends of roof rafters.
What is the purpose of a fascia board?
As part of the overall roof system, fascia serves the following purposes: It is used to secure the gutters to the roof and keep them in place. Blocks water from penetrating the roof deck and into the attic/home. Increases curb appeal by covering the open/rough ends of the rafters.
Are fascia boards necessary?
The Best Fascia Tips You Will Read This Year. The short answer to this question is, “ Yes! ” They are undoubtedly necessary because they help cap the edges of the rafters, hold gutters in place to help ensure proper water drainage, and more.
What does a fascia do on a house?
Fascia, or fascia boards, are long straight boards that are found at the lower edge of the roof and is fixed directly to roof trusses. It works to support the last row of tiles or other roofing material as well as supporting the guttering.
Do all houses have fascia boards?
Most modern homes have a fascia board, but some older homes lack this feature. It is therefore extremely important to keep an eye on your fascias for signs of wear, as whilst fascia usually last for years, they do need replacing if the fascia board becomes ages or water damaged.
Do roofers replace fascia boards?
Most roofers, in that case, are generally trained to spot problems in fascia and gutters as well the training required to take care of them. Fascia both keeps the gutters secure and seals the interior of the attic to some degree. Every so often in the lifespan of your home, you will see fascia repair or replacement.
What is the difference between a fascia board and a soffit?
Fascia is installed around the entire structure and is attached to the uncovered ends of rafters or to the top of exterior walls. Soffit is designed to be installed from the exterior wall to the fascia board. Sometimes the roof is flush with the edge of the exterior walls.
What is the purpose of soffits and fascias?
Soffits and fascia are part of your roofing system. They assist with ventilation of the attic, help secure your gutter system, and add to your home’s exterior aesthetics.
What’s the difference between fascia and soffit?
An exterior soffit is located on the span beneath the rafter tails, while the fascia is the exposed horizontal band you see at the end of the rafters. These architectural elements found along the eave area do more than just add visual interest and give a finished look to your home.
When should fascia boards be replaced?
How Do I Know When To Replace My Fascia and Soffits?
- Soft patches in wood, which means rot or holes are appearing.
- Crackled, flaking paint, which is a general sign of age.
- Evidence of animals and rodents; mice, rats and squirrels can take up home in the smallest of openings and be a sign your roofline is deteriorating.
Are fascia boards structural?
The fascia board is the one inch thick board that is nailed to the lower ends of the rafters, roof joists, or trusses to close the eave (Figure FB-1). Technically it is not considered a structural member, but it provides structural support for the gutters, when they are nailed to it.
How are fascia boards attached?
The fascia board is nailed to the rafter feet and usually has a rebate or lip for the soffit boards to slot into. They are then either fixed to a batten that is attached to the brickwork, or sat on top of the last course of brickwork.
Why do we need fascia?
Fascia is connective tissue. It connects every part of the body with every other part, wrapping around muscles and holding organs in place. Addressing issues in the fascia can reduce pain, increase range of motion, and help nourish muscles and nerves.
How thick is a fascia board?
Fascia Board Sizes #1 – 1×6 This is the most common fascia board you will find. Usually you have a 2×4 sub fascia behind this fascia board. Standard gutter size for residential homes is five or six inches.