FAQ: What Is A Cisco Dta 170hd?

The Cisco® Digital Transport Adapter (DTA) 170HD is a flexible solution that allows cable operators to transition to an all-digital network.

What does a DTA box do?

A digital television adapter (DTA), commonly known as a converter box or decoder box, is a television tuner that receives a digital television (DTV) transmission, and converts the digital signal into an analog signal that can be received and displayed on an analog television set.

What is a DTA box from Spectrum?

DTAs are small, digital devices that allow TVs to show programming delivered by the Spectrum digital network. Only TVs connected to a digital device (either a DTA or other Spectrum Receiver) will be able to view programming from our network.

How do you reset a DTA box?

Take the DTA remote and aim at the box, press and hold the INFO button (bottom right on the remote) this will take the DTA into Diag mode. From here press 1379 on the remote, when entered correctly it will reboot the DTA.

Does a flat screen TV need a converter box?

High Definition TVs are devices with built-in tuners designed to receive high quality digital signals. Since the built-in tuner is digital-ready, there is no need to purchase a converter box in addition to the HDTV. Only analog television (older models) require the use of a converter box.

What is DTA additional outlet SVC HD?

What Is Digital Outlet Service? Digital Outlet service refers to when a Comcast subscriber owns a fully blown digital box or DTA box for their additional smart TV or Xfinity compatible TV.

What is a Cisco box?

Some cable boxes from Cisco come in the form of adapters that will allow you to view digital TV on an analog set. They are available for purchase in a variety of formats, such as wired or wireless, and contain a variety of features.

You might be interested:  Question: What Is Eating My Eggplant Plants?

How do I program a Cisco DTA remote?

Cisco Remote Programming

  1. Locate the Manufacturer and codes from the list provided.
  2. Turn on the TV.
  3. On the Remote, press and hold the TV button.
  4. On the Remote, press and hold the OK button.
  5. Release both keys at the same time.
  6. Enter a four digit number matching the TV Manufacturer from the list provided.
  7. Test remote functions.

What is Pace DTA?

The Property Assessed Clean Energy (“PACE”) Program is a local government initiative that creates voluntary liens on private property and enables property owners to finance energy efficiency, renewable energy, water conservation, electric car, and seismic, wildfire protection, and storm resiliency projects for their

What is Cisco DTA HD?

The Cisco ® Digital Transport Adapter (DTA) 170HD is a flexible solution that allows cable operators to transition to an all-digital network.

How do I activate DTA on Comcast box?

Activate Your Equipment Online

  1. Connect your Internet, Voice and/or TV equipment and turn it on.
  2. Go online to Xfinity.com/activate for easy step-by-step activation instructions. If you’re activating your Xfinity Mobile device, go to xfinitymobile.com/activate.

How do you program DTA?

Program the Remote Control to the DTA Press and hold SETUP until the All Power LED turns red, then release. Press and release MENU rapidly (up to five times) until the Remote Control Pairing overlay appears on the screen. Enter the three-digit code that is displayed. You’ll see “Success!” displayed onscreen.

What is DTA power on a remote?

Your remote control is already programmed to. control your digital set-top box or DTA ( Digital Transport Adapter ). To control your TV functions (TV Input, TV Power, VOL+, YOL- and Mute), follow the steps below: CAN’T FIND YOUR CODE?

You might be interested:  FAQ: How far is new rochelle from new york city?

How do I reactivate my DTA?

Once the DTA starts to blink 2 times in a row, you must call our automated activation line (888-396-7255) and follow the instructions/prompts to complete the activation.