The motion sensor is based on passive infrared detection, therefore it works through clear glass. Most modern-day glass used in housing is 2 or 3 pane insulated glass and the necessary infrared heat detection will not pass through it.
Do motion detectors work through glass?
Motion detection does not work through windows reliably. Arlo cameras use two different kinds of motion detection, and both types are inhibited by glass, especially windows. Most glass used in homes today is insulated, limiting the movement of heat through the glass.
Can I put a security camera in my window?
Just about any camera can be a window camera if you set it on a windowsill facing out. But if you want a camera meant to keep an eye out your front windows (or any windows, really) then the Logitech Circle 2 with a window mount is your best bet.
How do you detect motion through glass?
To detect motion and record motions through glass or a glass window, placing the camera outside, mounting the camera on the wall or window ledge, installing them under a soffit or overhang. For example, installing wire-free security camera outside on the wall to keep an eye on areas of interest.
Can night vision see through glass?
Yes, an average night vision can see through glass if it is well utilized. In low light conditions, you can still see through glass clearly. It is highly recommended that you get a very good night vision device to use especially in complete darkness. With night vision, clear images are assured.
How can I make my IR camera see through glass?
Turning off the IR lights improves the picture even more. If you can’t push the camera onto the glass, try to angle it to offset the reflection. Even an angle of five degrees will help. Moving the reflection out of direct line of sight will clear up the picture enough so you can get by.
Can I point an indoor security camera outside through a window?
Best answer: Yes. You can point an indoor security camera outside through a window, but it may not work as well as you’re hoping.
How do I stop infrared reflecting off glass?
How to prevent the IR reflection of surveillance cameras
- Leave an outside light on.
- Disable the night vision mode.
- Get an IR illumination light.
- Consider investing in an outdoor CCTV camera.
How do you beat a motion sensor?
Actually, PIR motion sensors are useless at ambient temperatures above 95°F. The easiest way to defeat them is to either turn up the heat in the facility or turn off the air conditioning or both.
Does night vision work in pitch black?
Night vision goggles are possible because it’s never truly pitch black outside —it’s just very, very dark. In fact, it’s very difficult to block out all light unless you’re actively trying to do so. Night-vision goggles can take the little light coming from the moon or street lights and amplify it.