You can put new thinset on top of old, but only if the old thinset is perfectly smooth and level. This is rarely the case once the old tiles have been removed. The best option to smooth out the old thinset and prepare it for new tiles is to grind it down.
Will mortar stick to old mortar?
Applying fresh mortar on top of old mortar that is loose or falling out will do little or no good; enough of the old mortar must be removed to make room for a layer of new mortar that is at least half an inch thick, and even then it is important to make sure that what is left of the old mortar is still solid and
Will tile stick to mortar?
Mortar is commonly used to attach tiles to drywall or flooring. However, tiles can also be installed using an organic tile adhesive called mastic, or in select cases with epoxy. Mortar can be used with most tiles, and glass and stone tiles typically require mortar.
Do you need to remove mortar before grouting?
Because this mortar looks different from the grout, it needs to be removed before the final grout can be laid down. It is fastest to remove the mortar as soon as you see it seep up. Even if you wait until it’s time to grout, though, you can still get the mortar out of the grout joints before you apply the grout.
Will thinset stick to old adhesive?
Fortunately, most grout and mortar manufacturers make a thinset which will bond to “cut back” adhesive. Typically, the “cut back” should be scraped smooth so the tile is not sitting on ridges of adhesive – although it does not have to be absolutely flat.
How do you bond mortar to old concrete?
The most effective way to ensure a really good bond is with a scratch coat. This is simply a very wet coat made up by mixing the repair product with water. Mix up a small amount of the repair material to a soupy consistency. You don’t need to measure the water-just turn the stuff into slop.
Is thinset and mortar the same thing?
Thinset, while it is also sometimes referred to as a “mortar” is an adhesive. It’s a mix of cement, water, and fine sand. Due to its cement ingredients, thinset should be made up in small batches as needed.
How thick can tile mortar be?
Most tile installations require a 3/16-inch layer of mortar beneath the tile. A mortar layer 3/16 an inch thick is accomplished by spreading mortar with a 3/8-inch by 3/8-inch square-notched trowel. This thickness is ideal for most tile installations. However, sometimes a thicker layer of mortar is required.
Can grout be used as mortar?
Yes you can do it, is simple answer, if what you have is sanded grout. If you can add a little acrylic glue available in 4oz tubes at building material centers for a couple of dollars it will be even better. Alternatively you may be able to ask to take a torn bag of ThinSet for free, such as I have done.
How long do you let mortar set before grouting?
24 to 48 Hours You should wait at least 24 hours before grouting the tiles. You may notice that the edges of the thinset or the thinset showing through the grout lines looks dry. Don’t be fooled by this. The thinset under the tiles isn’t receiving as much air as the edges and is therefor not fully cured.
Do you wet tile before grouting?
Make sure it’s damp, not wet, and sweep diagonally across the face of the tile and wipe the grout off the tile surface. On your first few passes, the grout will smear all over the tile and look like a mess — that’s OK.
How do you remove mortar from tile before grouting?
Add a squirt of dish soap or a cup of granulated sugar to a bucket of warm water and then apply it to the areas where thinset is present. Use a sponge to gently scrub the thinset. You may start to notice the marks fading and the thinset coming away from the tiles already.
Do you need to remove old adhesive before you lay tile?
Over time tiles can get damaged and require replacing, and in during this removal process you’ll be left with old adhesive on the wall. Removing old adhesive is an essential part to replacing any tile.
Can you use old tile adhesive?
As a general rule, if there are no hard lumps in the adhesive it should be OK to use. With that in mind, expired adhesive may harden too quickly once mixed (powder), be too dry to spread (ready mixed) or in some cases do not harden at all if the setting agent has expired.
Can you tile over contact cement?
For some surfaces, contact cement is the only effective bonding material. Contact cement is already dry on contact. Once the solvent evaporates, the cement forms a flexible bond with no residual moisture. There is no need for clamping, so it can be used for gluing floor tiles, as well.