# How Much Do Shingles Cost At Home Depot?

3-Tab shingles generally cost \$25 to \$27 per bundle or \$75 to \$81 per square (100 sq. ft.). Main architectural lines of asphalt shingles are priced similarly at both Lowe’s and Home Depot. Typically, you can get a 20% bulk-purchase discount when buying 36 bundles of shingles or more.

## How much does 1 pack of shingles cover?

You usually purchase shingles by the bundle. Standard shingles are 12 by 36 inches and come 29 to a package. Most shingles come 3 bundles to a square — which is equal to 100 square feet. So, each bundle provides about 33 square feet of coverage.

## How many bundles of shingles do I need for a 12×12 roof?

As a rule of thumb, there are 3 bundles to a square, assuming that you are using three-tab strip shingles. There are also 29 standard-sized shingles (measuring 12 inches by 36 inches) in each one of these.

## How do I calculate shingles?

To estimate how many shingles you’ll need, first estimate the total square footage of your roof’s surface. To do this, measure the length and width of each plane on the roof, including dormers. Then, multiply length x width to get the square footage of each plane.

## How many bundles of shingles do I need for 1000 square feet?

Since there are twenty six shingles in a bundle of twenty year shingles (which is fine for starters and edges), divide the result by twenty six. For the number of ridge caps, multiply the length of the hip or ridge by twelve and divide it by five. This house is 1000 square feet. It requires 18 squares of shingles.

You might be interested:  What time it is in mexico right now

## How many bundles are on a pallet of shingles?

A pallet of shingles can hold up to 42 bundles. The pallet weighs in between 2,100 and 3,350 pounds.

## How do I figure out how many shingles I need for my roof?

Roof surfaces are measured in “squares”. A roofing square is equal to 100 square feet of the roof. To determine the number of squares on the gable roof example in this post, divide its total of 2400 square feet by 100 (2400 ÷ 100 = 24). This means you would need 24 squares of shingles to cover that roof.

## How many shingles do I need for a 24×24 garage?

Roof areas are measured in squares – one square equals 100 square feet of roof. To find the number of squares on the gable roof above, divide a total of 24,000 square feet by 100 (24,000 ÷ 100 = 240). This means that you will need 240 squares of shingles to cover this roof.

## How many starter shingles do I need?

Three bundles to a square is most common, which applies to most three-tab strip shingles and some lightweight laminated shingles. Heavier three-tabbed shingles and laminated shingles require four, or sometimes five, bundles to cover a square.

## How many bundles of shingles do I need for 1700 square feet?

The shingles cover 33.3 sq. 57 bundles is a ft. 1,700 / 33.3 + 10% for trim.

## How many bundles of shingles do I need for 1200 square feet?

Question by MSDevine57: How many bundles of shingle to repair a 1200 square foot home with archectural shingles. Answered by WoWHomeSolutions: Depends on the shingle at the end of the day but I am going to assume 4 bundles per square. At that measurement, you need to figure on 52 bundles at a 10% waste.

You might be interested:  Quick Answer: Is A Power Nap Good For You?

## How much does it cost to replace a roof on a 2200 square foot house?

A new asphalt shingles roof for a typical 2,000 to 2,200 square foot single-family house can range in price from \$9,500 to \$16,500 fully installed, including tear off and disposal of the old roof (up to two layers).